44.018 Immediate Assignment

 

 

 

This page is based on a call processing sequence between an MS and GSM Network Simulator. The details of the sequence and contents of the messages would differ from those from live network, but I think this would contain all the essential components of the call processing. The value in the "Time(sec.ms)/Memo" column is just for a reference to give you rough timing between each step and the next step. It is not the clean-cut/absolute value.

(This is at very early stages of the whole page that I am planning, so I will have on-going update for a long period).

 

 

 

RR  : System Information Type

 

NAS:RR,System Information Type 1

System Information Type 1 ::= DIVISION

  +-L2 Pseudo Length ::= V

  | +-L2 Pseudo Length value ::= INT (0..63) [21]

  | +-N(SD)or0_1 ::= FIX [0]

  | +-N(SD)or0_2 ::= FIX [1]

  +-Skip Indicator ::= V

  | +-Skip Indicator ::= FIX [0]

  +-RR management Protocol Discriminator ::= V

  | +-Protocol Discriminator ::= PD [6]

  +-System Information Type 1 Message Type ::= V

  | +-Message Type ::= MSG [19]

  +-Cell Channel Description ::= V

  | +-Octet1-16 ::= DIVISION

  |   +-Format-ID bit128-127 ::= SWITCH [bit map 0]

  |   +-(Format-ID bit128-127)=0 ::= BRANCH

  |     +-spare ::= FIX [0]

  |     +-Cell Allocation Absolute RF Channel Number bit124-121 ::= INT (0..15) [0]

  |     +-Cell Allocation Absolute RF Channel Number bit120-001 ::= OCTETARRAY SIZE(15..15)

                                                                 [000000000000000000000000000000]

  +-RACH Control Parameter ::= V

  | +-Octet1 ::= DIVISION

  | | +-Max retrans ::= CHOICE [Maximum 1 retransmission]

  | | +-Tx-integer ::= CHOICE [3 slots used to spread transmission]

  | | +-CELL_BAR_ACCESS ::= CHOICE [The cell is not barred]

  | | +-Call reestablishment allowed ::= CHOICE [Call Reestablishment not allowed in the cell]

  | +-Octet2-3 ::= DIVISION

  |   +-Access Control Class C15-C11 ::= INT (0..31) [0]

  |   +-Emergency Call allowed ::= CHOICE [Emergency call allowed in the cell to all MSs]

  |   +-Access Control Class C9-C0 ::= INT (0..1023) [0]

  +-SI 1 Rest Octets ::= V

    +-flg0 ::= SWITCH [L]

    +-Band indicator ::= CHOICE [ARFCN indicates 1800 band]

    +-spare padding ::= PAD SIZE(23..23) [2B]

 

 

NAS:RR,System Information Type 2

System Information Type 2 ::= DIVISION

  +-L2 Pseudo Length ::= V

  | +-L2 Pseudo Length value ::= INT (0..63) [22]

  | +-N(SD)or0_1 ::= FIX [0]

  | +-N(SD)or0_2 ::= FIX [1]

  +-Skip Indicator ::= V

  | +-Skip Indicator ::= FIX [0]

  +-RR management Protocol Discriminator ::= V

  | +-Protocol Discriminator ::= PD [6]

  +-System Information Type 2 Message Type ::= V

  | +-N(SD)or0 ::= FIX [0]

  | +-Message Type ::= MSG [1A]

  +-BCCH Frequency List ::= V

  | +-Octet1 ::= DIVISION

  | | +-bit128-127 ::= INT (0..3) [0]

  | | +-EXT-IND ::= CHOICE [The information element carries the complete BA]

  | | +-BA-IND ::= INT (0..1) [0]

  | | +-bit124-121 ::= INT (0..15) [0]

  | +-Octet2-16 ::= DIVISION

  |   +-bit120-001 ::= OCTETARRAY SIZE(15..15) [000000000000000000000000000200]

  +-NCC Permitted ::= V

  | +-NCC permitted ::= INT (0..255) [255]

  +-RACH Control Parameter ::= V

    +-Octet1 ::= DIVISION

    | +-Max retrans ::= CHOICE [Maximum 1 retransmission]

    | +-Tx-integer ::= CHOICE [3 slots used to spread transmission]

    | +-CELL_BAR_ACCESS ::= CHOICE [The cell is not barred]

    | +-Call reestablishment allowed ::= CHOICE [Call Reestablishment not allowed in the cell]

    +-Octet2-3 ::= DIVISION

      +-Access Control Class C15-C11 ::= INT (0..31) [0]

      +-Emergency Call allowed ::= CHOICE [Emergency call allowed in the cell to all MSs]

      +-Access Control Class C9-C0 ::= INT (0..1023) [0]

 

 

NAS:RR,System Information Type 3

System Information Type 3 ::= DIVISION

  +-L2 Pseudo Length ::= V

  | +-L2 Pseudo Length value ::= INT (0..63) [18]

  | +-N(SD)or0_1 ::= FIX [0]

  | +-N(SD)or0_2 ::= FIX [1]

  +-Skip Indicator ::= V

  | +-Skip Indicator ::= FIX [0]

  +-RR management Protocol Discriminator ::= V

  | +-Protocol Discriminator ::= PD [6]

  +-System Information Type 3 Message Type ::= V

  | +-Message Type ::= MSG [1B]

  +-Cell Identity ::= V

  | +-CI value ::= INT (0..65535) [1]

  +-Location Area Identification ::= V

  | +-Octet1 ::= DIVISION

  | | +-MCC digit 2 ::= INT (0..15) [0]

  | | +-MCC digit 1 ::= INT (0..15) [0]

  | +-Octet2 ::= DIVISION

  | | +-MNC digit 3 ::= INT (0..15) [15]

  | | +-MCC digit 3 ::= INT (0..15) [1]

  | +-Octet3 ::= DIVISION

  | | +-MNC digit 2 ::= INT (0..15) [1]

  | | +-MNC digit 1 ::= INT (0..15) [0]

  | +-Octet4-5 ::= DIVISION

  |   +-LAC ::= INT (0..65535) [1]

  +-Control Channel Description ::= V

  | +-Octet1 ::= DIVISION

  | | +-MSC Release ::= CHOICE [MSC is Release '98 or older]

  | | +-Attach-detach allowed ::= CHOICE [MSs in the cell shall apply]

  | | +-BS-AG-BLKS-RES ::= INT (0..7) [0]

  | | +-CCCH-CONF ::= CHOICE [1 basic physical channel used for CCCH: not combined with SDCCHs]

  | +-Octet2 ::= DIVISION

  | | +-spare ::= FIX [0]

  | | +-CBQ3 ::= CHOICE [Iu mode not supported]

  | | +-spare ::= FIX [0]

  | | +-BS-PA-MFRMS ::= CHOICE [2 multiframes period]

  | +-Octet3 ::= DIVISION

  |   +-T3212 time-out value ::= INT (0..255) [0]

  +-Cell Options ::= V

  | +-DN-IND ::= CHOICE [Dynamic ARFCN mapping is not used by the PLMN]

  | +-PWRC ::= CHOICE [PWRC is set]

  | +-DTX ::= CHOICE [2-The MS shall not use uplink discontinuous transmission]

  | +-RADIO-LINK-TIMEOUT ::= CHOICE [16]

  +-Cell Selection Parameters ::= V

  | +-Octet1 ::= DIVISION

  | | +-CELL-RESELECT-HYSTERESIS ::= CHOICE [0 dB RXLEV hysteresis for LA re-selection]

  | | +-MS-TXPWR-MAX-CCH ::= INT (0..31) [8]

  | +-Octet2 ::= DIVISION

  |   +-ACS ::= CHOICE [System information type 16 and 17 are not broadcast on the BCCH]

  |   +-NECI ::= CHOICE [New establishment causes are not supported]

  |   +-RXLEV-ACCESS-MIN ::= INT (0..63) [0]

  +-RACH Control Parameters ::= V

  | +-Octet1 ::= DIVISION

  | | +-Max retrans ::= CHOICE [Maximum 1 retransmission]

  | | +-Tx-integer ::= CHOICE [3 slots used to spread transmission]

  | | +-CELL_BAR_ACCESS ::= CHOICE [The cell is not barred]

  | | +-Call reestablishment allowed ::= CHOICE [Call Reestablishment not allowed in the cell]

  | +-Octet2-3 ::= DIVISION

  |   +-Access Control Class C15-C11 ::= INT (0..31) [0]

  |   +-Emergency Call allowed ::= CHOICE [Emergency call allowed in the cell to all MSs]

  |   +-Access Control Class C9-C0 ::= INT (0..1023) [0]

  +-SI 3 Rest Octets ::= V

    +-Optional selection parameters ::= DIVISION

 

 

NAS:RR,System Information Type 4

System Information Type 4 ::= DIVISION

  +-L2 Pseudo Length ::= V

  | +-L2 Pseudo Length value ::= INT (0..63) [12]

  | +-N(SD)or0_1 ::= FIX [0]

  | +-N(SD)or0_2 ::= FIX [1]

  +-Skip Indicator ::= V

  | +-Skip Indicator ::= FIX [0]

  +-RR management Protocol Discriminator ::= V

  | +-Protocol Discriminator ::= PD [6]

  +-System Information Type 4 Message Type ::= V

  | +-Message Type ::= MSG [1C]

  +-Location Area Identification ::= V

  | +-Octet1 ::= DIVISION

  | | +-MCC digit 2 ::= INT (0..15) [0]

  | | +-MCC digit 1 ::= INT (0..15) [0]

  | +-Octet2 ::= DIVISION

  | | +-MNC digit 3 ::= INT (0..15) [15]

  | | +-MCC digit 3 ::= INT (0..15) [1]

  | +-Octet3 ::= DIVISION

  | | +-MNC digit 2 ::= INT (0..15) [1]

  | | +-MNC digit 1 ::= INT (0..15) [0]

  | +-Octet4-5 ::= DIVISION

  |   +-LAC ::= INT (0..65535) [1]

  +-Cell Selection Parameters ::= V

  | +-Octet1 ::= DIVISION

  | | +-CELL-RESELECT-HYSTERESIS ::= CHOICE [0 dB RXLEV hysteresis for LA re-selection]

  | | +-MS-TXPWR-MAX-CCH ::= INT (0..31) [8]

  | +-Octet2 ::= DIVISION

  |   +-ACS ::= CHOICE [System information type 16 and 17 are not broadcast on the BCCH]

  |   +-NECI ::= CHOICE [New establishment causes are not supported]

  |   +-RXLEV-ACCESS-MIN ::= INT (0..63) [0]

  +-RACH Control Parameters ::= V

  | +-Octet1 ::= DIVISION

  | | +-Max retrans ::= CHOICE [Maximum 1 retransmission]

  | | +-Tx-integer ::= CHOICE [3 slots used to spread transmission]

  | | +-CELL_BAR_ACCESS ::= CHOICE [The cell is not barred]

  | | +-Call reestablishment allowed ::= CHOICE [Call Reestablishment not allowed in the cell]

  | +-Octet2-3 ::= DIVISION

  |   +-Access Control Class C15-C11 ::= INT (0..31) [0]

  |   +-Emergency Call allowed ::= CHOICE [Emergency call allowed in the cell to all MSs]

  |   +-Access Control Class C9-C0 ::= INT (0..1023) [0]

  +-CBCH Channel Description ::= TV OPTIONAL:Omit

  | +-Octet1 ::= DIVISION

  | | +-Channel Description IEI ::= IEI [64]

  | +-Octet2 ::= DIVISION

  | | +-Channel type and TDMA offset ::= INT (0..31) [1]

  | | +-Timeslot number ::= INT (0..7) [0]

  | +-Octet3-4 ::= DIVISION

  |   +-Training Sequence Code ::= INT (0..7) [0]

  |   +-Hopping channel ::= SWITCH [Single RF channel]

  |   +-(Hopping channel)=0 ::= BRANCH

  |     +-spare ::= FIX [0]

  |     +-Absolute RF Channel Number ::= INT (0..1023) [0]

  +-CBCH Mobile Allocation ::= TLV OPTIONAL:Omit

  | +-Octet1 ::= DIVISION

  | | +-Mobile Allocation IEI ::= IEI [72]

  | +-Octet2 ::= DIVISION

  | | +-Length of mobile allocation contents ::= LEN (0..255) [0]

  | +-Octet3- ::= DIVISION

  |   +-Mobile Allocation RF Channel ::= OCTETARRAY SIZE(0..8)

  +-SI 4 Rest Octets ::= V

    +-SI4 Rest Octets_O ::= DIVISION

    | +-Optional selection parameters ::= DIVISION

    | | +-flg21 ::= SWITCH [L]

    | +-Optional Power offset ::= DIVISION

    | | +-flg31 ::= SWITCH [L]

    | +-flg11 ::= SWITCH [L]

    +-flg1 ::= SWITCH [L]

    +-(flg1)=L ::= BRANCH

    | +-Break indicator ::= CHOICE [Additional parameters are not sent in SYSTEM INFORMATION TYPE 7 and 8]

    +-spare padding ::= PAD SIZE(23..23) [2B]

 

 

NAS:RR,System Information Type 5

System Information Type 5 ::= DIVISION

  +-L2 Pseudo Length ::= V

  | +-L2 Pseudo Length value ::= INT (0..63) [18]

  | +-N(SD)or0_1 ::= FIX [0]

  | +-N(SD)or0_2 ::= FIX [1]

  +-Skip Indicator ::= V

  | +-Skip Indicator ::= FIX [0]

  +-RR management Protocol Discriminator ::= V

  | +-Protocol Discriminator ::= PD [6]

  +-System Information Type 5 Message Type ::= V

  | +-N(SD)or0 ::= FIX [0]

  | +-Message Type ::= MSG [1D]

  +-BCCH Frequency List ::= V

    +-Octet1 ::= DIVISION

    | +-bit128-127 ::= INT (0..3) [0]

    | +-EXT-IND ::= CHOICE [The information element carries the complete BA]

    | +-BA-IND ::= INT (0..1) [0]

    | +-bit124-121 ::= INT (0..15) [0]

    +-Octet2-16 ::= DIVISION

      +-bit120-001 ::= OCTETARRAY SIZE(15..15) [000000000000000000000000000200]

 

 

NAS:RR,System Information Type 6

System Information Type 6 ::= DIVISION

  +-L2 Pseudo Length ::= V

  | +-L2 Pseudo Length value ::= INT (0..63) [11]

  | +-N(SD)or0_1 ::= FIX [0]

  | +-N(SD)or0_2 ::= FIX [1]

  +-Skip Indicator ::= V

  | +-Skip Indicator ::= FIX [0]

  +-RR management Protocol Discriminator ::= V

  | +-Protocol Discriminator ::= PD [6]

  +-System Information Type 6 Message Type ::= V

  | +-Message Type ::= MSG [1E]

  +-Cell Identity ::= V

  | +-CI value ::= INT (0..65535) [1]

  +-Location Area Identification ::= V

  | +-Octet1 ::= DIVISION

  | | +-MCC digit 2 ::= INT (0..15) [0]

  | | +-MCC digit 1 ::= INT (0..15) [0]

  | +-Octet2 ::= DIVISION

  | | +-MNC digit 3 ::= INT (0..15) [15]

  | | +-MCC digit 3 ::= INT (0..15) [1]

  | +-Octet3 ::= DIVISION

  | | +-MNC digit 2 ::= INT (0..15) [1]

  | | +-MNC digit 1 ::= INT (0..15) [0]

  | +-Octet14-5 ::= DIVISION

  |   +-LAC ::= INT (0..65535) [1]

  +-Cell Options ::= V

  | +-DTX_1 ::= BITARRAY SIZE(1..1) [0]

  | +-PWRC ::= CHOICE [PWRC is set]

  | +-DTX_2 ::= BITARRAY SIZE(2..2) [10]

  | +-RADIO-LINK-TIMEOUT ::= CHOICE [16]

  +-NCC Permitted ::= V

  | +-NCC permitted ::= INT (0..255) [255]

  +-SI 6 Rest Octets ::= V

    +-flg1 ::= SWITCH [L]

    +-flg2 ::= SWITCH [L]

    +-DTM_support ::= SWITCH [DTM is not supported in the serving cell]

    +-Band indicator ::= CHOICE [ARFCN indicates 1800 band]

    +-flg3 ::= SWITCH [L]

    +-flg4 ::= SWITCH [L]

    +-implicit spare ::= PAD SIZE(19..19) [2B]

 

 

 

RR  : Channel Request

 

Channel Request has various functionalities and the one right after power-on is is equivalent to RACH process of UMTS and LTE. Simply put, this message is to tell the network "I want to camp on you, please allocate me a radio resource that I initiate the connection process".

 

GSM radio resources

GSM interfaces

NameNodes
UmMS - BTS
AbisBTS - BSC
ABSC - MSC
BMSC - VLR
CGMSC - HLR
DVLR - HLR
EMSC - MSC
FMSC - EIR
GVLR - VLR
HHLR - AUC

MS
Mobile Station
BTS
Base Transceiver station
BSC
Base Station Controller
MSC
Mobile Service Switching Center
GMSC
Gateway MSC
HLR
Home Location Register
VLR
Visitor Location Register
EIR
Equipment Identity Register

Radio Resource Control (44.018)

TypeHexaMessage
Channel establishment
0 0 1 1 1 1 0 03c Reserved
0 0 1 1 1 0 1 13b Additional Assignment
0 0 1 1 1 1 1 13f Immediate Assignment
0 0 1 1 1 0 0 139 Immediate Assignment Extended
0 0 1 1 1 0 1 03a Immediate Assignment Reject
0 1 1 0 1 0 0 169 Immediate Packet Assignment
Ciphering
0 0 1 1 0 1 0 135 Ciphering Mode Command
0 0 1 1 0 0 1 032 Ciphering Mode Complete
Configuration change
0 0 1 1 0 0 0 030 Configuration Change Command
0 0 1 1 0 0 0 131 Configuration Change Ack
0 0 1 1 0 0 1 133 Configuration Change Reject
Handover
0 0 1 0 1 1 1 02e Assignment Command
0 0 1 0 1 0 0 129 Assignment Complete
0 0 1 0 1 1 1 12f Assignment Failure
0 0 1 0 1 0 1 12b Handover Command
0 0 1 0 1 1 0 02c Handover Complete
0 0 1 0 1 0 0 028 Handover Failure
0 0 1 0 1 1 0 12d Physical Information
0 0 0 0 1 0 0 008 Reserved
0 0 1 0 0 0 1 123 Reserved
Channel release
0 0 0 0 1 1 0 10d Channel Release
0 0 0 0 1 0 1 00a Partial Release
0 0 0 0 1 1 1 10f Partial Release Complete
Paging and Notification
0 0 1 0 0 0 0 121 Paging Request Type 1
0 0 1 0 0 0 1 022 Paging Request Type 2
0 0 1 0 0 1 0 024 Paging Request Type 3
0 0 1 0 0 1 1 127 Paging Response
0 0 1 0 0 0 0 020 Notification/nch
0 0 1 0 0 1 0 125 Reserved
0 0 1 0 0 1 1 026 Notification/response
0 0 0 0 1 0 1 10b Reserved
System information
0 0 0 0 0 0 0 101 System Information Type 14
0 1 0 0 0 0 1 143 System Information Type 15
0 1 0 0 0 0 0 040 System Information Type 18
0 1 0 0 0 0 0 141 System Information Type 19
0 1 0 0 0 0 1 042 System Information Type 20
0 1 0 0 0 1 0 044 System Information Type 13alt
0 1 0 0 0 1 0 145 System Information Type 2n
0 1 0 0 0 1 1 046 System Information Type 21
0 1 0 0 0 1 1 147 System Information Type 22
0 1 0 0 1 1 1 14f System Information Type 23
Miscellaneous
0 0 0 1 0 0 0 010 Channel Mode Modify
0 0 0 1 0 0 1 012 Rr Status
0 0 0 1 0 1 1 117 Channel Mode Modify Acknowledge
0 0 0 1 0 1 0 014 Frequency Redefinition
0 0 0 1 0 1 0 115 Measurement Report
0 0 0 1 0 1 1 016 Classmark Change
0 0 0 1 0 0 1 113 Classmark Enquiry
0 0 1 1 0 1 1 036 Extended Measurement Report
0 0 1 1 0 1 1 137 Extended Measurement Order
0 0 1 1 0 1 0 034 Gprs Suspension Request
0 0 0 1 0 1 1 016 Mbms Announcement
0 0 1 1 0 1 1 036 Service Information
VGCS uplink control
0 0 0 0 1 0 0 109 Vgcs Uplink Grant
0 0 0 0 1 1 1 00e Uplink Release
0 0 0 0 1 1 0 00c Reserved
0 0 1 0 1 0 1 02a Uplink Busy
0 0 0 1 0 0 0 111 Talker Indication
0 1 1 0 0 1 1 066 Priority Uplink Request
0 1 1 0 0 1 1 167 Data Indication
0 1 1 0 1 0 0 068 Data Indication 2
Application
0 0 1 1 1 0 0 038 Application Information
DTM control
0 1 0 0 1 0 0 048 Dtm Assignment Failure
0 1 0 0 1 0 0 149 Dtm Reject
0 1 0 0 1 0 1 04a Dtm Request
0 1 0 0 1 0 1 14b Packet Assignment
0 1 0 0 1 1 0 04c Dtm Assignment Command
0 1 0 0 1 1 0 14d Dtm Information
0 1 0 0 1 1 1 04e Packet Notification
Inter RAT specific
0 1 1 0 0 0 0 060 Utran Classmark Change
0 1 1 0 0 0 1 062 Cdma 2000 Classmark Change
0 1 1 0 0 0 1 163 Inter System To Utran Handover Command
0 1 1 0 0 1 0 064 Inter System To Cdma2000 Handover Command
0 1 1 0 0 1 0 165 Geran Iu Mode Classmark Change
0 1 1 0 0 1 1 066 Inter System To E-utran Handover Command
RR short protocol
0 0 0 0 000 System Information Type 10
0 0 0 0 101 Notification/facch
0 0 0 1 002 Uplink Free
0 0 1 0 004 Enhanced Measurement Report (uplink)
0 0 1 0 105 Measurement Information (downlink)
0 0 1 1 006 Vbs/vgcs Reconfigure
0 0 1 1 107 Vbs/vgcs Reconfigure2
0 1 0 0 008 Vgcs Additional Information
0 1 0 0 109 Vgcs Sms Information
0 1 0 1 00a System Information Type 10bis
0 1 0 1 10b System Information Type 10ter
0 1 1 0 00c Vgcs Neighbour Cell Information
0 1 1 0 10d Notify Application Data
GTTP
0 0 0 0 0 0 0 000 Gprs Information

DTM
Dual Transfer Mode allows simultaneous transfer of Circuit switched (CS) voice and Packet switched (PS)
VBS
Voice Broadcast Service
VGCS
Voice Group Call Service

System Information (44.018)

TypeDescriptionCommentL2 pseudo length
1Control of the RACH and of the cell allocation21
2Control of the RACH and of the BCCH allocation in the neighbour cells22
2bisControl of the RACH and of the extension of the BCCH allocation in the neighbour cells21
2terInformation on the extension of the BCCH allocation in the neighbour cells18
2quaterAdditional measurement and reporting parameters and/or UTRAN neighbour cells
and/or E-UTRAN neighbour frequencies and/or CSG neighbour cells
1
2nParameters affecting cell reselection for the neighbouring cells1
3Control on the RACH, the location area identification, the cell identity and various other information about the cell18
4Control of the RACH, the location area identification and various other information about the cell
5List of BCCH frequencies of the neighbouring cells to be reported onSACCH18
5bisInformation on the extension of the BCCH allocation in the neighbour cellsSACCH18
5terInformation on the extension of the BCCH allocation in the neighbour cellsSACCH18
6Information of location area identification, of cell identity and various other informationSACCH11
7Cell reselection parameters to be used in that cell1
8Cell reselection parameters to be used in that cell1
9Information on the scheduling of information on the BCCH1
13Information related to GPRS in the cell0
13altInformation related to Iu mode in the cell0
14Dynamic ARFCN mapping. It allows to allocate ARFCN values and dynamically map them to physical frequenciesSACCH18
15Dynamic ARFCN mapping. It allows to allocate ARFCN values and dynamically map them to physical frequenciesBCCH1
16Cell selection and reselection parameters to be used in that cell1
17Cell selection and reselection parameters to be used in that cell1
18Non-GSM broadcast information1
19Information on COMPACT neighbour cells1
20Non-GSM broadcast information1
21List of EAB specific authorized access classes and an indication of the subcategory of mobile stations targeted by EAB2
22Network sharing and domain-specific access control2
23PLMN-specific information about UTRAN/E-UTRAN frequencies related to inter RAT cell reselectionNetwork sharing2

EAB
Extended Access Barring

GPRS / EDGE MS classes for multislot capability (45.002 Annex B.1)

Multislot classMaximum number of slotsMinimum number of slotsType
RxTxSumTtaTtbTraTrb
111232421
221332311
322332311
431431311
522431311
632431311
733431311
841531211
932531211
1042531211
1143531211
1244521211
1333NANA(a)3(a)2
1444NANA(a)3(a)2
1555NANA(a)3(a)2
1666NANA(a)2(a)2
1777NANA(a)102
1888NANA0002
1962NA3(b)2(c)1
2063NA3(b)2(c)1
2164NA3(b)2(c)1
2264NA2(b)2(c)1
2366NA2(b)2(c)1
2482NA3(b)2(d)1
2583NA3(b)2(d)1
2684NA3(b)2(d)1
2784NA2(b)2(d)1
2886NA2(b)2(d)1
2988NA2(b)2(d)1
3051621111
3152621111
3253621111
3354621111
3455621111
35516211+to11
36526211+to11
37536211+to11
38546211+to11
39556211+to11
40617111to1
41627111to1
42637111to1
43647111to1
44657111to1
45667111to1

(a) = 1 with frequency hopping = 0 without frequency hopping (b) = 1 with frequency hopping or change from Rx to Tx = 0 without frequency hopping and no change from Rx to Tx (c) = 1 with frequency hopping or change from Tx to Rx = 0 without frequency hopping and no change from Tx to Rx (d) = 1 change from Tx to Rx, or with frequency hopping and the MS is either assigned a downlink dual carrier configuration or does not support fast downlink frequency switching (see 3GPP TS 24.008) = 0 no change from Tx to Rx and either without frequency hopping or the MS is not assigned a downlink dual carrier configuration and supports fast downlink frequency switching (see 3GPP TS 24.008) to = 31 symbol periods (this can be provided by a TA offset, i.e. a minimum TA value) Type 1 MS are not required to transmit and receive at the same time Type 2 MS are required to be able to transmit and receive at the same time

Back to top

0 comments

Leave a Reply

Your email address will not be published. Required fields are marked *